Publications
2004
E. Vlakh, A. Novikov, G. Vlasov, T. Tennikova
Journal of Peptide Science, 10: 719–730 (2004)
Monoliths based on a copolymer of glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) can be used directly as sorbents for affinity chromatography after solid phase peptide synthesis. The quality of the synthesized products, the amount of grown peptides on a support and the reproducibility of the process must be considered. A determination of the quantity of the introducing β-Ala (and, consequently, the total amount of synthesized peptide) was carried out. Three peptides complementary to recombinant tissue plasminogen activator (t-PA) have been synthesized using Fmoc-chemistry on GMA-EDMA disks. The peptidyl ligands were analysed by amino acid analysis, ES-MS and HPLC methods.
The affinity binding parameters were obtained from frontal elution data. The results were compared with those established for GMA-EDMA affinity sorbents formed by the immobilization of the same but separately synthesized and purified ligands. The immobilization on GMA-EDMA disks was realized using a one-step reaction between the amino groups of the synthetic ligand and the original epoxy groups of monolithic material. The affinity constants found for two kinds of sorbent did not vary significantly. Finally, the directly obtained affinity sorbents were tested for t-PA separation from a cellular supernatant.
E. G. Vlakh, A. Tappe, C. Kasper, T. B. Tennikova
Journal of Chromatography B, 810 (2004) 15–23
Plasminogen activators are the proteases which convert plasminogen into plasmin dissolving, in its turn, the major component of blood clots, fibrin. They are extremely useful in heart attack therapy. Modern and most appropriate way of scaled up production of these valuable proteins is gene engineering. In this case, a separation and a purification of target product become the important steps of the whole process. Recently developed affinity chromatography on short monolithic columns seems to be a very attractive method for these purposes. High speed of a process prevents the protein’s denaturation due to temperature or/and solvents influence. The better mass transfer mechanism (convection rather than diffusion) allows considering only biospecific complexing as time limiting step. Specificity of several synthetic peptides to plasminogen activators have been studied by affinity chromatography on short monolithic columns. Peptide ligands were synthesized by conventional solid phase peptide synthesis (SPPS). The immobilization procedure was carried out as a one step process at static conditions. The results of quantitative evaluation of such affinity interactions were compared with those established for plasminogen that is the natural affinity counterpart to both proteases. Additionally, some of investigated peptides were synthesized directly on GMA–EDMA disks and their affinity properties were compared with those established for the case of immobilized ligands. The possibility of using of synthetic peptidyl ligands for plasminogen activators isolation from native cell supernatant and model protein mixtures has been demonstrated.
E. G. Vlakh, A. Tappe, C. Kasper, T. B. Tennikova
Journal of Chromatography B, 810 (2004) 15–23
Plasminogen activators are the proteases which convert plasminogen into plasmin dissolving, in its turn, the major component of blood clots, fibrin. They are extremely useful in heart attack therapy. Modern and most appropriate way of scaled up production of these valuable proteins is gene engineering. In this case, a separation and a purification of target product become the important steps of the whole process. Recently developed affinity chromatography on short monolithic columns seems to be a very attractive method for these purposes. High speed of a process prevents the protein’s denaturation due to temperature or/and solvents influence. The better mass transfer mechanism (convection rather than diffusion) allows considering only biospecific complexing as time limiting step. Specificity of several synthetic peptides to plasminogen activators have been studied by affinity chromatography on short monolithic columns. Peptide ligands were synthesized by conventional solid phase peptide synthesis (SPPS). The immobilization procedure was carried out as a one step process at static conditions. The results of quantitative evaluation of such affinity interactions were compared with those established for plasminogen that is the natural affinity counterpart to both proteases. Additionally, some of investigated peptides were synthesized directly on GMA–EDMA disks and their affinity properties were compared with those established for the case of immobilized ligands. The possibility of using of synthetic peptidyl ligands for plasminogen activators isolation from native cell supernatant and model protein mixtures has been demonstrated.
M. Bartolini, V. Cavrini, V. Andrisano
Journal of Chromatography A, 1031 (2004) 27–34(2004) 27–34
The development and characterization of a human recombinant acetylcholinesterase (hrAChE) micro-immobilized-enzyme reactor (IMER), prepared by using an in situ immobilization procedure is reported. hrAChE was covalently immobilized on an ethylenediamine (EDA) monolithic convective interaction media (CIM) disk (12mm x 3mm i.d.), previously derivatized with glutaraldehyde. The optimal conditions for the immobilization were: 12 μg of enzyme dissolved in 800 μl of phosphate buffer (50 mM, pH 6.0). The mixture was gently agitated overnight at 4 °C. The resulting Schiff bases were reduced by cyanoborohydride and the remaining aldehydic groups were condensed with monoethanolamine. Under these conditions, 0.22 U of hrAChE were immobilized with retention of 3.0% of the initial enzymatic activity. The activity of the immobilized hrAChE was stable for over 60 days. The activity and kinetic parameters of the hrAChE micro-IMER were investigated by inserting the micro-IMER in a HPLC system and it was demonstrated that the enzyme retained its activity. The micro-IMER was characterized in terms of units of immobilized enzyme and best conditions for immobilization yield. IMERs were compared for their relative enzyme stability, immobilized units, yield and aspecific matrix interactions. The effect of AChE inhibitors was evaluated by the simultaneous injection of each inhibitor with the substrate. The relative IC50 values were found in agreement with those derived by the conventional kinetic spectrophotometric method. In comparison with previously developed AChE-based IMERs, AChE monolithic micro-IMER showed advantages in terms of reduction of analysis time (2 min), lower aspecific matrix interactions and lower backpressure. Included in a HPLC system, it can be used for the rapid screening of new compounds’ inhibitory potency. The advantages over the conventional methods are the increased enzyme stability and system automation which allows a large number of compounds to be analyzed in continuous.
K. Benčina, A. Podgornik, A. Štrancar, M. Benčina
Journal of Separation Science 2004, 27, 811-818
Monolithic Convective Interaction Media (CIM) have been activated with epoxide and imidazole carbamate functionalities and used as supports for covalent immobilization of protein A, deoxyribonuclease I, and trypsin. The efficiency of immobilization for these proteins was determined from the amount of bound IgG, degradation of DNA, and hydrolysis of Nα-benzoyl-L-arginine ethyl ester, respectively. The respective biological activities of trypsin and the binding capacity of protein A immobilized via imidazole carbamate groups were 11.45 and 2.25 times higher than those obtained for epoxide matrix while they were practically equal for deoxyribonuclease I. The kinetics of immobilization was studied in detail for trypsin under dynamic conditions and revealed that the enzyme immobilized via imidazole carbamate groups already reached its highest activity in 5 min. In contrast, a much longer time was required for immobilization via epoxy groups.
2003
I. Mihelič, A. Podgornik, T. Koloini
Journal of Chromatography A, 987 (2003) 159–168
This work investigates the influence of temperature on the binding capacity of bovine serum albumin (BSA), soybean trypsin inhibitor and l-glutamic acid to a CIM® (DEAE) weak anion-exchange disk monolithic column. The binding capacity was determined experimentally under dynamic conditions using frontal analysis. The effect on the dynamic binding capacity of dimers present in the BSA solution has been evaluated and a closed-loop frontal analysis was used to determine the equilibrium binding capacities. The binding capacity for both BSA and soybean trypsin inhibitor increased with increasing temperature. In the case of l-glutamic acid, an increase in the binding capacity was observed with temperature up to 20 °C. A further increase in temperature caused a decrease of the dynamic binding capacity.
M. Vodopivec, A. Podgornik, M. Berovič, A. Štrancar
Journal of Chromatography B, 795 (2003) 105-113
The immobilization of the enzymes citrate lyase, malate dehydrogenase, isocitrate dehydrogenase and lactate dehydrogenase to CIM monolithic supports was performed. The long-term stability, reproducibility, and linear response range of the immobilized enzyme reactors were investigated along with the determination of the kinetic behavior of the enzymes immobilized on the CIM monoliths. The Michaelis–Menten constant Km and the turnover number k3 of the immobilized enzymes were found to be flow-unaffected. Furthermore, the Km values of the soluble and immobilized enzyme were found to be comparable. Both facts indicate the absence of a diffusional limitation in immobilized CIM enzyme reactors.
2002
K. Pflegerl, A. Podgornik, E. Berger, A. Jungbauer
J. Comb. Chem. 2002, 4, 33-37
Solid-phase peptide synthesis was performed on glycidyle methacrylate-co-ethylene dimethacrylate monoliths using Fmoc chemistry. The native epoxy groups were amino-functionalized by reaction with ethylenediamine or ammonia ions. A peptide directed against human blood coagulation factor VIII was synthesized as a model peptide. Amino acid analysis revealed the correct amino acid ratio as present in the sequence. The ligand density of 5 μmol/mL was equal to that achieved with conventional peptide immobilization via epoxy groups. These supports were directly used as peptide affinity chromatography matrixes. The functionality of the CIM monolithic supports was proven by affinity chromatography of factor VIII. The ammonia-functionalized support performed with low hydrophobicity and did not show unspecific adsorption of proteins.
H. Podgornik, A. Podgornik
Enzyme and Microbial Technology 31 (2002) 855–861
The possibility of covalent attachment of LiP H2 and LiP H8 to CIM monoliths was studied. Due to negligible diffusional resistance, they can be useful tools to study characteristics of the immobilized lignin peroxidase (LiP). Immobilization to epoxy groups was performed using alkaline conditions (borate-phosphate buffer; pH 7.5). Characteristics of immobilized LiP were compared and factors that influence their biologic activity were evaluated using flow through experiments. Enzyme kinetics was determined via oxidation of veratryl alcohol (VA) into veratraldehyde (Vald). While VA oxidation rate increased by increasing flow rate (up to 1.5 ml/min) for LiP H2, it was almost constant in a wide flow rate range for LiP H8. This observation together with the stepwise deactivation of the enzyme by consecutive experiments was ascribed to accumulation of the formed Vald inside the support. Calculated kinetic parameters showed 3–5 times higher Km value for VA for both tested isoforms in comparison to free enzyme. The catalytic constant was found to be approximately 0.5 s-1 for both isoforms. Immobilized LiP H8 was used for decolorization of azo dye Mahogany.
A. Podgornik, T. B. Tennikova
Advances in Biochemical Engineering/ Biotechnology, 2002, Vol. 76, 167-206
In the last decade there were many papers published on the study of enzyme catalyzed reactions performed in so-called chromatographic reactors. The attractive feature of such systems is that during the course of the reaction the compounds are already separated, which can drive the reaction beyond the thermodynamic equilibrium as well as remove putative inhibitors. In this chapter, an overview of such chromatographic bioreactor systems is given. Besides, some immobilization techniques to improve enzyme activity are discussed together with modern chromatographic supports with improved hydrodynamic characteristics to be used in this context.
H. Podgornik, A. Podgornik
Enzyme and Microbial Technology 31 (2002) 855–861
The possibility of covalent attachment of LiP H2 and LiP H8 to CIM monoliths was studied. Due to negligible diffusional resistance, they can be useful tools to study characteristics of the immobilized lignin peroxidase (LiP). Immobilization to epoxy groups was performed using alkaline conditions (borate-phosphate buffer; pH 7.5). Characteristics of immobilized LiP were compared and factors that influence their biologic activity were evaluated using flow through experiments. Enzyme kinetics was determined via oxidation of veratryl alcohol (VA) into veratraldehyde (Vald). While VA oxidation rate increased by increasing flow rate (up to 1.5 ml/min) for LiP H2, it was almost constant in a wide flow rate range for LiP H8. This observation together with the stepwise deactivation of the enzyme by consecutive experiments was ascribed to accumulation of the formed Vald inside the support. Calculated kinetic parameters showed 3–5 times higher Km value for VA for both tested isoforms in comparison to free enzyme. The catalytic constant was found to be approximately 0.5 s−1 for both isoforms. Immobilized LiP H8 was used for decolorization of azo dye Mahogany.
2001
D. Josić, A. Buchacher
J. Biochem. Biophys. Methods 49 (2001) 153–174
Monoliths are useful chromatographic supports, as their structure allows improved mass transport. This results in fast separation. Once the ligand of interest has been immobilized, chromatographic separation can also be accomplished in affinity mode. Ligands with low molecular mass have been shown to be the easiest to immobilize. Nowadays, ligands with low molecular mass are often designed by combinatorial chemical techniques. In addition, many applications have been described where ligands with high molecular mass, such as Proteins A and G, antibodies, lectins and receptors are used.
The immobilization of an enzyme on the monolithic support creates a flow-through reactor. Small proteins, such as carbonic anhydrase, can be directly immobilized on the support. However, in the case of large molecules, the active center of the enzyme is no longer accessible at all or only to a limited degree. An improvement can be achieved by introducing a spacer, which allows maximum enzymatic conversion. Fast conversion of substrates with high molecular mass has been investigated with immobilized trypsin. It was shown that in case of high-molecular-mass substrates, the conversion rate depends very much on the flow-rate. Most applications described have been performed on an analytical or semi-preparative scale. However, the technical problems of up-scaling are close to being definitely solved, enabling enzymatic conversion on a preparative scale in the future.
D. Josić, A. Buchacher
J. Biochem. Biophys. Methods 49 (2001) 153–174
Monoliths are useful chromatographic supports, as their structure allows improved mass transport. This results in fast separation. Once the ligand of interest has been immobilized, chromatographic separation can also be accomplished in affinity mode. Ligands with low molecular mass have been shown to be the easiest to immobilize. Nowadays, ligands with low molecular mass are often designed by combinatorial chemical techniques. In addition, many applications have been described where ligands with high molecular mass, such as Proteins A and G, antibodies, lectins and receptors are used.
The immobilization of an enzyme on the monolithic support creates a flow-through reactor. Small proteins, such as carbonic anhydrase, can be directly immobilized on the support. However, in the case of large molecules, the active center of the enzyme is no longer accessible at all or only to a limited degree. An improvement can be achieved by introducing a spacer, which allows maximum enzymatic conversion. Fast conversion of substrates with high molecular mass has been investigated with immobilized trypsin. It was shown that in case of high-molecular-mass substrates, the conversion rate depends very much on the flow-rate. Most applications described have been performed on an analytical or semi-preparative scale. However, the technical problems of up-scaling are close to being definitely solved, enabling enzymatic conversion on a preparative scale in the future.
H. Podgornik, M. Stegu, A. Podgornik, A. Perdih
FEMS Microbiology Letters 201 (2001) 265-269
High initial Mn(II) concentration results in accumulation of a Mn(III) tartrate complex in the growth medium of Phanerochaete chrysosporium. Since Mn(III) is the major oxidant in ligninolysis by manganese peroxidase, the role of accumulated complex should not be neglected when degradation experiments by a crude culture filtrate are performed. To study the Mn(III) complex oxidative potential it was isolated by absorption to polyamide followed by desorption with an alkaline methanol solution. High performance liquid chromatography analysis and atomic absorption spectroscopy confirmed that the isolate was Mn(III) tartrate. Oxidation of 2,2′-azino-bis(3-ethylbenz-thiazoline-6-sulfonate) was used for testing the temperature and pH stability of the isolate that also intensively oxidized 2,6-dimethoxyphenol. In comparison with the non-isolated complex in the culture filtrate, the isolate showed increased temperature and pH stability. The oxidative potential of the isolated Mn(III) tartrate was additionally tested by decolorization of the synthetic dye Indigo carmine.
2000
M. Vodopivec, M. Berovič, J. Jančar, A. Podgornik, A. Štrancar
Analytica Chimica Acta 407 (2000) 105-110
A new polymeric macroporous material, Convective Interaction Media (CIM) was applied as a support for glucose oxidase (GOD) immobilisation. CIM epoxy disks with the immobilised enzyme were integrated as an enzyme reactor in a flow injection analysis (FIA) system and applied to on-line monitoring of glucose during cultivation of Saccharomyces cerevisiae and citric acid production by Aspergillus niger. The developed CIM GOD disk–FIA system exhibited good signal reproducibility and satisfactory long-term stability with a linear response in the range 10–200 mg l-1. The CIM disk applied as an enzyme reactor proved to be a successful replacement for conventionally used packed-bed columns and as such it was well suited for on-line monitoring of bioprocesses.
1999
H. Podgornik, A. Podgornik, A. Perdih
Analytical Biochemistry 272, 43–47 (1999)
The HPLC separation of lignin peroxidase isoenzymes using Convective Interaction Media disks containing quaternary amine and diethylaminoethyl ion-exchange active groups is proposed. In contrast to standard HPLC procedures the separation can be performed within a few minutes without considerably affecting the separation resolution. The method is reproducible and gives a linear response of integrated peak area to protein concentration for all measured isoenzymes. The separation resolution is retained unchanged by applying crude culture filtrate instead of a sample previously frozen and dialyzed. The optimized method might therefore be used for on-line monitoring of lignin peroxidase isoenzyme composition during fermentation. On the other hand, the proposed method is comparable in time to the original method of lignin peroxidase activity measurement (proposed by Tien and Kirk), providing additionally the isoenzyme composition.
1998
D. Josić, H. Schwinn, A. Štrancar, A. Podgornik, M. Barut, Y. P. Lim, M. Vodopivec
Journal of Chromatography A, 803 (1998) 61–71
Different ligands with high molecular masses are immobilized on compact, porous separation units and used for affinity chromatography. In subsequent experiments different enzymes are immobilized and used for converting substrates with low and high molecular masses. Disk or tube with immobilized concanavalin A (ConA) are used as model systems for lectin affinity chromatography. The enzyme glucose oxidase is used as a standard protein to test the ConA units. Subsequently glycoproteins from plasma membranes of rat liver are separated, using units with immobilized ConA. The enzyme dipeptidyl peptidase IV, which is used as a model protein in the experiments, is enriched about 40-fold in a single step, with a yield of over 90%. The results are only slightly better than those obtained with ConA when it is immobilized on bulk supports. The important improvement lies in the reduction of separation time to only 1 h. Experiments concerning the isolation of monoclonal antibodies against clotting factor VIII (FVIII) are carried out on disks, combining anion-exchange chromatography and protein A affinity chromatography as a model for multidimensional chromatography. Both IgG (bound to the protein A disk) and accompanying proteins (bound to the anion-exchange disk) from mouse ascites fluid are retarded and eluted separately. With the immobilized enzymes invertase and glucose oxidase (GOX) the corresponding substrates with low molecular masses, saccharose and glucose, are converted. It is shown that the amount of immobilized enzyme and the concentration of the substrate are responsible for the extent of the conversion, whereas the flow-rates used in the experiments have no effect at all. The influence of immobilization chemistry was investigated with GOX. Indirect immobilization with ConA as spacer proved to be the best alternative. With trypsin, immobilized on a disk, substrates with high molecular masses are digested in flow-through. For optimal digestion the proteins have to be denatured in the buffer for sodium dodecyl sulfate–polyacrlyamide gel electrophoresis prior to application. In contrast to the conversion of substrates with low molecular masses, flow-rates play an important part in conversion of substrates with high molecular masses. With lower flow-rates a higher degree of digestion is achieved.
D. Josić, H. Schwinn, A. Štrancar, A. Podgornik, M. Barut, Y. P. Lim, M. Vodopivec
Journal of Chromatography A, 803 (1998) 61–71
Different ligands with high molecular masses are immobilized on compact, porous separation units and used for affinity chromatography. In subsequent experiments different enzymes are immobilized and used for converting substrates with low and high molecular masses. Disk or tube with immobilized concanavalin A (ConA) are used as model systems for lectin affinity chromatography. The enzyme glucose oxidase is used as a standard protein to test the ConA units. Subsequently glycoproteins from plasma membranes of rat liver are separated, using units with immobilized ConA. The enzyme dipeptidyl peptidase IV, which is used as a model protein in the experiments, is enriched about 40-fold in a single step, with a yield of over 90%. The results are only slightly better than those obtained with ConA when it is immobilized on bulk supports. The important improvement lies in the reduction of separation time to only 1 h. Experiments concerning the isolation of monoclonal antibodies against clotting factor VIII (FVIII) are carried out on disks, combining anion-exchange chromatography and protein A affinity chromatography as a model for multidimensional chromatography. Both IgG (bound to the protein A disk) and accompanying proteins (bound to the anion-exchange disk) from mouse ascites fluid are retarded and eluted separately. With the immobilized enzymes invertase and glucose oxidase (GOX) the corresponding substrates with low molecular masses, saccharose and glucose, are converted. It is shown that the amount of immobilized enzyme and the concentration of the substrate are responsible for the extent of the conversion, whereas the flow-rates used in the experiments have no effect at all. The influence of immobilization chemistry was investigated with GOX. Indirect immobilization with ConA as spacer proved to be the best alternative. With trypsin, immobilized on a disk, substrates with high molecular masses are digested in flow-through. For optimal digestion the proteins have to be denatured in the buffer for sodium dodecyl sulfate–polyacrlyamide gel electrophoresis prior to application. In contrast to the conversion of substrates with low molecular masses, flow-rates play an important part in conversion of substrates with high molecular masses. With lower flow-rates a higher degree of digestion is achieved.